Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Ferris
Ferris sits on the Blackland Prairie just south of Dallas, and a lot of the homes here still heat with wood. If smoke rolled into the room the first time you lit a fire this season, or your chimney crown is cracked after one of our hard freezes, you’re in the right place. We handle chimney repair across Ferris, from small masonry fixes to full relining. One call books an inspection, and we tell you plainly what needs fixing and what can safely wait. Call (833) 633-6933. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Ferris Homeowners Call Banner Chimney Sweep for Chimney Repair
We’re a chimney-only company, not a general handyman outfit that also sweeps flues. That focus is why people in Ferris with more than one fireplace call us. Every technician on the job is trained in flue, liner, cap and masonry systems, and our technicians have up to 13 years of experience. We inspect first and recommend second, so the repair list comes from what the camera shows, not from guesswork.
The properties here often run two fireplaces, a stove, or a combination of insert and masonry flue under one roof, and that takes a different kind of plan than a single chimney. When we work with Ferris homeowners, we walk the whole system, flue by flue, so a crack in one crown doesn’t get lost while we’re focused on another chimney. We work with a curated roster of trade-grade brands – DuraFlex for liner systems, HeatShield for ceramic resurfacing, Olympia Chimney and Famco for caps and components – the same materials chimney professionals nationwide specify. Not hardware-store parts put in with hope. We keep our repairs and installations to products made for the trade, because on a Blackland Prairie house that sees hard freezes and hot summers, the material is what holds up.
Ferris is one of the towns we serve regularly, and it’s an easy run for us from our Grand Prairie base of operations. Fast dispatch from 7am to 7pm, Sunday through Friday. If you call outside those hours, we answer 24/7 and book you into the next opening.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Masonry Repair in Ferris
Chimney Masonry Repair in Ferris is usually crown-and-cap first, relining second – not the reverse. That order is what the older 1950s – 1980s masonry fireplaces on the Ferris side of the Blackland Prairie need, because most of them were built without caps or liners, so water has been getting into the system for decades before anyone noticed. A typical masonry repair here runs $450 – $1,800 for crowning and brick work, and a full facade rebuild on a badly damaged chimney runs $3,000 – $7,500. The written estimate sets the final price.
Crown rebuilding and waterproofing
When a chimney crown cracks after a hard freeze, water gets into the masonry above the firebox and starts working on the flue tiles. We rebuild the crown to shed water away from the flue opening, then seal the masonry with a breathable waterproofing so vapor can still escape. That combination stops the cycle of freeze-thaw damage that turns one crack into a rebuild.
Spalling brick and tuckpointing
Spalling brick – where the face of the brick pops off in layers – is common on the west-facing sides of Ferris chimneys, and it’s usually a moisture problem rather than a bad-brick problem. Repointing the joints and replacing the spalled units restores the chimney’s structural face. It’s a much cheaper job than waiting until the loose masonry starts pulling away from the flue.
Chimney Cap Installation in Ferris
Chimney Cap Installation in Ferris is the single most cost-effective repair a property with multiple flues can make. A properly sized, listed cap runs $185 – $550 depending on flue count, chimney style and whether the flue needs a custom cap. On a Ferris home with two fireplaces or a fireplace plus a wood stove, that’s two caps, and each one needs to be sized to its own flue. It’s a small job compared to the relining it prevents.
Why uncapped flues matter
Most of the 1950s – 1980s masonry chimneys in Ferris were built without caps. Rain goes straight down the flue, freezes in the joints during one of our North Texas cold snaps, and works the flue tiles loose. A cap blocks the rain, keeps out birds and squirrels, and lets the chimney do its job. It’s the first thing we look for on the roof.
Sizing a cap to the flue
A cap that’s the wrong size is worse than no cap, because it chokes the draft. We measure the flue opening, match the cap to the appliance, and set it on the crown so it sheds water outward. For a house with a masonry fireplace and a wood stove, that’s two different caps – the masonry flue and the stove’s stainless liner each breathe differently.
Trusted Brands We Service in Ferris
We work with recognized names in the chimney trade because materials are the part of a repair that has to last. DuraFlex liner systems go in for code-compliant venting upgrades. HeatShield ceramic resurfacing restores a damaged flue from the inside when the flue is otherwise sound. Olympia Chimney and Famco supply caps, dampers and components we specify on installs. We don’t claim to stock parts locally, but we source them fresh for each job through the brand supply chain, so turnaround stays quick. Trade-grade materials, properly installed. That’s the point.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Ferris Homes
- Uncapped flues taking in rain. Older Ferris masonry chimneys were mostly built without a cap, so rain hits the flue tile and crown directly. Freeze-thaw cycles crack the crown and shift the tile, and the damage goes unnoticed until water shows up inside.
- Summercracked mortar and shifted flue tiles. North Texas summers are brutal on masonry. Mortar joints crack, flue tiles shift out of alignment, and draft fails – but the homeowner finds out when the first fire of the year sends smoke into the room.
- Glazed creosote in one hard season. Intermittent, heavy wood burning in a stove or fireplace that was never relined can build glazed third-degree creosote in a single winter. No brush removes it. It needs a chemical-grade treatment and often a liner.
- Smoke chamber and damper failure. On a Ferris property with two fireplaces, one smoke chamber often fails before the others. The damper sticks, the smoke chamber is rough, and smoke spills forward instead of drafting up – a draft problem, not just a cleaning problem.
Pricing for Chimney Repair in Ferris, TX
Chimney repair in Ferris typically runs from around $185 for a cap install on a single flue up to $7,500 or more for a full masonry rebuild on an old facade. The middle of the range covers most of the jobs we do here. A crown rebuild and waterproofing typically runs $450 – $1,200. Tuckpointing and spalling brick repair runs $400 – $1,400 depending on how much face is failing. Relining a single flue runs $2,400 – $5,400 with a DuraFlex or HeatShield system, and multi-flue properties scale by flue count. The estimate is free and set per job – the written estimate is the final number. Prices are driven by flue count, appliance type, roof access and how much masonry has to be rebuilt. Call (833) 633-6933 for an exact quote. Estimates are free.
We Also Serve Cities Near Ferris
We work the towns around Ferris as well – Lancaster, Glenn Heights, Ovilla and DeSoto – and the same crown-and-cap-first, relining-second approach applies across the region. If you’re in Ferris or one of the neighboring towns, one call covers the whole property. Call (833) 633-6933 for a free estimate.
Serving Ferris, TX – Our Local Coverage Area
We serve Ferris and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Ferris
You need a Level 2 inspection on each flue, which for a Ferris property with two fireplaces and a wood stove means three separate inspections with three separate reports. Each appliance vents differently, and one flue’s condition tells you nothing about the others. We run them in a single visit and give you a flue-by-flue report with photos. Call (833) 633-6933 to book the inspection – estimates are free.
Smoke coming into the room after a cold snap is almost always a draft failure, and in Ferris it’s usually one of two things – a shifted flue tile or a failing smoke chamber or damper. Both follow the freeze-thaw pattern here, and both show up the first time you light a fire, not before. A Level 2 inspection with a camera tells you which. Call (833) 633-6933 to schedule it. We answer 24/7.
Yes – a cap is the single cheapest repair that prevents the most expensive damage on a Ferris masonry chimney. Most of the 1950s – 1980s homes here were built without one, and the rain that gets in through the open flue is what cracks the crown and shifts the tiles. A cap install runs $185 – $550. Call (833) 633-6933 for an exact quote.
No – glazed third-degree creosote cannot be removed with a brush, and sweeping it actually does nothing except leave it in place. In Ferris, a single hard-use winter on an unrelined stove can build this coating. It needs a chemical treatment or a liner installation to correct the draft and stop the buildup from reforming. Call (833) 633-6933 to have it looked at before the next fire.
Because by the 1970s, the chimney was often built without a cap or a liner, and 50 years of Blackland Prairie freeze-thaw has had time to do real damage to the crown, the flue tile and the mortar. A sweep cleans the flue, but it can’t rebuild what’s already failed. An inspection tells you which problems you have and in what order to fix them. Call (833) 633-6933 for a free estimate on the repair.
Written by the team at Banner Chimney Sweep.